FlyTech 3000 Series User Manual page 59

Item Description
Enabled BIOS searches for floppy disk drive to determine if it is 40 or
80 tracks. Note that BIOS can not tell from 720K, 1.2M or
1.44M drive type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by track
number. Note that there will be no warning message if the
drive installed is 360K.
Boot Up NumLock Status
The default value is On.
Item
On
Off
Gate A20 Option
This entry allows you to select how the gate A20 is handled. The gate
A20 is a device used to address memory above 1 Mbytes. Initially, the
gate A20 was support, it is more common, and much faster, for the
chipset to provide support for A20.
Item
Normal
Fast
Typematic Rate Setting
This determines the typematic rate .
Item Description
Enabled Enable typematic rate and typematic delay programming
Disabled Disable typematic rate and typematic delay programming.
The system BIOS will use default value of this 2 items and
the default is controlled by keyboard.
Typematic Rate (Chars/Sec)
When the typematic rate setting is enabled, this selection allows you
select the rate at which the key is accelerated.
Description
Keypad is number keys after boot-up
Keypad is arrow keys after boot-up
Description
Handling gate A20 by keyboard
Handling gate A20 by chipset
4-13