Table of Contents
Advertisement
Chapter 1. Precaution
This section is written to protect both user and the system. In order to
lengthen the service life of the system, please read this section carefully.
1.1 Check the Line Voltage
The operating voltage for the 3000 series (B64) use an internal micro
ATX power supply FT-8015 should cover the range of 115V / 230V AC,
otherwise the system may be damaged.
Rating
115 / 230V AC
ê Caution:
The power supply use a voltage selector switch to select AC input
voltage of 115V or 230V. The switch will be set to the customer
required voltage position before being shipped.
1.2 Environmental Conditions
Place your 3000 series on a solid, level surface. Be sure to allow enough
space on each side so that you can have an easy access.
Avoid installing this system in an extremely hot or cold environment.
Avoid putting this system in a place exposed to direct sunlight, in a
closed car in the summer time, or near a heating device such as a stove.
Temperature: Operating Temperature: 5 °C ~ 35 °C.
Storage Temperature: -10 °C ~ 60 °C.
Do not use the system that has been left outdoors on a cold winter day.
The operating lowest ambient temperature is 5 °C.
Avoid moving the system rapidly from a hot place to a cold place or vice
versa. Otherwise, condensation may be caused form inside the system.
Line Voltage
90~132 / 180 ~ 264V AC
1-1
Frequency
47/63 Hz
Advertisement
Table of Contents
