4.2.9.Integrated Peripherals
The menu sets up the connections between the CPU and the I/O ports
and the hard disk controllers.
The printer unit specialized for the POS 500 uses COM3 and is assigned
to 3E8h/IRQ 11.
The touch panel uses COM4 and is assigned to 2E8h/IRQ 10.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to transfer
data to and from your hard disk drive (HDD).
Item
Enabled
Disabled
Description
IDE controller uses block mode.
IDE controller uses standard mode.
4-30