Table of Contents
Advertisement
Doze
Monitor blanked when the system enters any power saving
mode.
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any)
on your system. Activity of the selected IRQ always awakens the
system.
The choices: NA, 3, 4, 5, 7, 9, 10, 11
Doze Mode
When enabled and after the set time of system inactivity, the CPU
clock will run at slower speed while all other devices still operate at full
speed.
Standby Mode
When enabled and after the set time of system inactivity, the CPU
clock will run at lower speed and the video would be shut off while all
other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of the
time.
Y ou may select the percent of time that the clock runs.
The Choice: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%
PCI/VGA Act Monitor
When Enabled, any video activity restarts the global timer for Standby
mode.
The Choice: Enabled, Disabled.
4-56
Advertisement
Table of Contents
