Charger, Signet - Taylor-Dunn SS-025-34 Service And Parts Manual

SS and MX Models, DC System

CHARGER, SIGNET

Note: There are no user serviceable components inside the charger
Note: The charger AC cord is an integral part of the charger. When replacing the charger, do not cut
and splice the AC cord. Cutting the AC cord will void the charger warranty.
QTY PART # DESCRIPTION
2 75-318-20 Butt splice
2 75-320-51 Knife connector
1 76-200-00 AC plug, 115 volt
Standard Single Phase AC wire Color Codes as of 2010.
Note: Older systems may use a alternate color code.
Refer high voltage wiring repairs to a qualified technician
United States / Canada
Neutral: White
Hot: Black or Red
Ground: Green
IEC (Europe) and United Kingdom
Neutral: Blue
Hot: Brown
Ground: Green/Yellow
MS-534-13
Note: The harness connectors and AC plug
are not included with the charger.
Model HBS Charger
PART #
79-302-20
* Not available at time of printing
Replacement Parts
DESCRIPTION
24 volt Flooded Batteries (WET, FLA)
Page 113