3.1
Chassis Grounding
The UNO-1372G provides good EMI protection and a stable grounding base. There
is an easy-to-connect chassis grounding point to use.
Please note that the system ground and chassis ground are separated.
3.2
Inserting an mSATA
1.
Remove the power cord.
2.
Loosen the four screws in the left cover.
3.
Disassemble the USB board with two screws.
4.
Plug a mSATA card with your OS and application program into the first mPCIe
slot.
5.
Tighten the two screws on board to fix mSATA.
6.
Secure the left cover.
UNO-1372G User Manual
Figure 3.1 Chassis Grounding Connection
14