Tr 3000 Remote-Control Unit; Tr 4000 Remote-Control Unit; Tr 1000 / Tr 1100 Remote-Control Unit - Fronius Trans Pocket 4000 CEL Operating Instructions/Spare Parts List

TR 3000 remote-
control unit
(continued )
TR 4000 remote-
control unit
Fig.8
(35) Hot start setting dial
(36) Arc-force setting dial
TR 1000 / TR 1100
REMOTE-CONT-
ROL UNIT
Fig.9
NOTE! Parameters that can be set on the remote-control unit cannot be chan-
ged on the power source. Parameter changes can only be made on the remote-
control unit.

TR 4000 remote-control unit

Manual electrode welding ... influences the welding current during the ignition phase
0 no influence
10 100% increase in welding current during the ignition phase
Manual electrode welding ... for influencing the short-circuiting amperage at the
instant of droplet transfer
0 soft, low-spatter arc
100 harder, more stable arc
NOTE! Parameters that can be set on the remote- control unit cannot be
changed on the power source. Parameter changes can only be made on the
remote-control unit.
TR 1000 remote-control unit
(33) Parameter switchover button ... for
selecting and displaying the parame-
ters "Welding voltage" and "Welding
(33)
(34)
current" on the digital display
(35)
NOTE! When you change a
(36)
parameter, the value for this
parameter is brie-fly indicated -
for control purposes - on the
digital display of the r.c. unit.
(34) Welding-current setting dial ... for
selecting the welding current
Fig.10 TR 1100 remote-control unit
9