Description of control panel
General remarks
The functions on the control panel are all arranged in a very logical way. The various
parameters needed for welding are easy to select, by pressing the appropriate button,
and can easily be
-
-
Description of
the control panel
Fig.2
altered with the adjusting dial
shown on the display during welding
NOTE! Owing to software updates, you may find that your machine has certain
functions that are not described in these Operating Instructions, or vice-versa.
Also, certain illustrations may be very slightly different from the actual controls
on your machine. However, these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described here until you have read and
completely understood all of the following documents:
-
these Operating Instructions
-
all operating instructions for the system components, especially the "Safety
rules"
(2)
(6)
(9)
Control panel
(11)(10)
(12)
(5)
(4)
(7)
(3)
4
(1)
(3)
(8)