Procedure
1. Carefully lower the cabinet on the
foundation. Refer to section 4.3. Make
sure that the holes in the cabinet (A)
and the foundation (B) are aligned.
2. Install the fasteners (C).
3. Tighten the fasteners.
5.6
Electrical installation
5.6.1
Electrical installation procedure
Preliminary requirements
Procedure
1. Open the front and right doors. Refer to section 8.1.
2. Connect the PE wire. Refer to section 5.6.2.
3. Connect the enclosure to the earth. Refer to section 5.6.3.
4. Connect the wires of the AC input cable. Refer to section 5.6.4.
5. If it is necessary, connect the Ethernet cable. Refer to section 5.6.5.
6. Close the doors. Refer to section 8.2.
5.6.2
Connect the PE wire
Preliminary requirements
9AKK108466A3703-EN | 001
•
Open spanner. Refer to
section 10.5.
Caution: Make sure that
there is no kink in the
cables.
•
Installation engineer
•
The front and right doors
are open.
•
Installation engineer
Installation
•
•
Cable lugs and fasteners.
Refer to section 10.6.
•
C
A
B
49