Universal Robots UR20 Service Manual page 44

Hide thumbs Also See for UR20:

Table of Contents

8. Packing and Shipping of Robot/Spare Parts

4. Power down, disconnect main power, and disconnect the Robot Arm from controller.

5. Pack the Robot Arm and Control Box in designated boxes. Ensure the Robot Arm is

orientated correctly in the box.

NOTICE

Transporting the robot without its original packaging voids all warranties from

Universal Robots A/S.

If the robot is transported attached to a 3rd-party application / installation, see the

recommendations for transporting the robot without the original transport pack-

aging.

You can see the recommendations for transportation without packaging on

s.com/

If the robot arm cannot be moved, due to faults preventing the robot arm from releasing brakes.

It may be necessary to disassemble the arm into two parts between the elbow joint and upper

arm tube, and strap it securely to a pallet with two straps on the each tube before shipping. This

will not void the warranty.

Service Manual

help.universal-robot-

UR20

Table of Contents