Table of Contents
Advertisement
Evaluation Board User Guide
EVALUATION BOARD SOFTWARE
INSTALLING THE LABVIEW RUN-TIME ENGINE
The LabVIEW™ run-time engine must be installed on the PC
first unless LabVIEW 2009 is already installed. Insert the
ADP1650-EVALZ setup CD into the CD-ROM and run
LVRTE90STD.exe.
INSTALLING ADP1650 EVALUATION SOFTWARE
1.
Insert the ADP1650-EVALZ setup CD into the CD-ROM
and run Setup.exe. When the dialog box shown in Figure 2
appears, click Next.
Figure 2. ADP1650 Evaluation Software Setup
2.
When the box shown in Figure 3 is displayed, click Yes to
accept the license agreement.
Figure 3. License Agreement
3.
In the box shown in Figure 4, click Next to install the files
to the default destination folder, or click Browse... to
choose a different location.
4.
Click Finish to complete the installation.
Rev. A | Page 3 of 16
Figure 4. Installation Summary
Figure 5. Installation Complete
UG-139
Advertisement
Table of Contents
Need help?
Do you have a question about the ADP1650 and is the answer not in the manual?
Questions and answers