Appendix A: Product Certifications And Installation Guidelines For Conformance; Important Notes; A-1.1 Safety Notes - Emerson PACSystems RSTi User Manual

User Manual
GFK-2745C
Appendix A: Product Certifications and
This appendix describes the compliance markings that appear on PACSystems RST products
and the corresponding standards to which the products have been certified. This appendix
also provides installation requirements for conformance to standards and additional safety
guidelines for installing in the European Union.
A-1

Important Notes

Solid state equipment has operational characteristics differing from those of
electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls
describes some important differences between solid state equipment and hard-wired
electromechanical devices.
Because of this difference, and also because of the wide variety of uses for solid state
equipment, all persons responsible for applying this equipment must ensure that each
intended application of this equipment is acceptable.
In no event will Emerson be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes.
Because of the many variables and requirements associated with any particular installation,
Emerson cannot assume responsibility or liability for actual use based on the examples and
diagrams.
A-1.1 Safety Notes
WARNING
The modules are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the modules, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, for example, RSTi Bus Pin.
Product Certifications and Installation Guidelines for Conformance
Installation Guidelines for
Conformance
Appendix A
Nov 2019
341