Using The Balance; Switching The Balance On/Off (Standby) - Sartorius SECURA3101-1CEU Operating Instructions Manual

Using the Balance

A D
isoCAL Max 2100 g
0.00
G
j
z
Weighing
i
Statistics
o
20
User Manual Secura ® , Quintix
5 Using the Balance

5.1 Switching the Balance On/Off (Standby)

a
y The Leveling screen is displayed first after any model is switched on .
Level the balance if necessary . The actual weighing screen is only displayed after
d=0.01 g
confirmation .
V
– When the balance is switched on, the following message appears on the display:
: Level The balance has been leveled (if leveled) .
Secura ®
Quintix ®
– If the balance needs to be leveled, a corresponding message appears on the
display (see page 21) .
– The balance must be regularly calibrated and adjusted to ensure correct weighing
results (see page 73) .
– The display text is given in English as a default . The language can be changed
(see page 29) .
To switch the balance to standby mode, select the Menu key at the bottom left of
t
the display on the Weighing screen .
y The menu is displayed .
Mixing
Components
Select the
t
y The balance switches to standby mode .
To switch the balance back on, select
t
The balance starts in the application that was most recently used before it was
switched off .
® , Practum ®
: Level Please check leveling .
and Practum ®
button in the Application menu .
j
j on the display .