Sartorius SECURA3101-1CEU Operating Instructions Manual page 97

Cleaning the Balance Housing
Disconnect from the supply voltage: Disconnect the device from the power supply .
t
If necessary, disconnect the data cable from the balance .
Never open the balance or the AC adaptor .
The parts contained in these cannot be cleaned, repaired, or replaced by the operator .
– Make sure that no liquid or dust gets into the balance or the AC adaptor .
– Remove the base plate, pan support, and weighing pan from the draft shield .
– Never use cleaning agents that contain solvents or abrasive ingredients which
may ultimately damage the equipment .
Secura and Quintix Models:
® ®
The plastic top and bottom parts of the balance housing are coated with a special
t
substance that allows these parts to be cleaned using acetone .
Do not clean the following parts with acetone or aggressive cleaning agents:
control panel, mains plug, data interface, labels, verified seal, or any other plastic
parts .
Wipe the balance with a soft, dry cloth after cleaning .
t
Contaminated Equipment:
–
Health risks from product contamination due to product deposits and the
collection of residue with microbial contaminations .
– Health risk from biological or microbiological substances .
– Observe cleaning specifications .
– Examine the cleaning results closely .
Care and Maintenance
User Manual Secura ® , Quintix ® , Practum
97
®