ICPDAS WinCon-8000 Getting Started page 36

the defined area and click "Next" to go to the following step (see figure
5-1-3).
(3c) WCE MFC AppWizard-Step 3 of 4: In this step, please choose "Yes,
please" to generate source file comments. And set the MFC library as
a shared DLL or statically linked library. Then Click "Next" to go to the
next step.
(3d) WCE MFC AppWizard-Step 4 of 4: Click the "Finish" button to start the
AppWizard to create the classes, which are shown in the figure below.
Fig. 5-1-3
Fig. 5-1-4
WinCon-8000 Getting Start Manual-- 36