functions that can be used for this selected module, as shown in the following
figure.
14. Select "DO_8" from the pop-up list box and press the TAB key. Then input
the parameters of the function, which means inputting "(slot, data)".
Fig. 5-2-14a (for VB.Net)
5.2.4 Building an Application Program
When you have finished the above processes, you could build an application by
following the below steps.
1.
In the toolbox menu select "Release" from the solution Configurations in the
Combo box.
Fig. 5-2-13
Fig. 5-2-15
WinCon-8000 Getting Start Manual-- 60
Fig 5-2-14b (for C#.Net)