ICPDAS WinCon-8000 Getting Started page 51

3. You can change the project location which is to be created, if so desired.
4. Give your application a Name (for example; "Demo"). This will create a new
directory under the defined Location to contain your application's source
code.
5. Click OK.
6. This will start the "Smart Device Application Wizard" (see Figure 5-2-2). At
this point you need to choose between developing for Windows CE and
developing for the Pocket PC, a specific type of Windows CE device. Your
choice will determine which project templates are used to construct your
initial blank application.
Fig. 5-2-1b
WinCon-8000 Getting Start Manual-- 51