ICPDAS WinCon-8000 Getting Started page 19

Serial Number box: This field displays the serial number of the
Wincon-8000.
MAC address: The field displays the physical address of Ethernet port.
(For W-8X4X, upper field displays 1
displays 2
EEPROM Siz
Wincon-8000.
Flash Memory
Wincon-8000.
OS Version box: This field displays the current operating system.
OS Imag
system.
WinCon SDK Version box: This field displays the current WinconSDK_DLL
version.
Auto -execute Tab
The Auto-execute tab, provides ten execute files, which can be run after the
WinCE system has been launched on the WinCon-8000 system. You can set ten
execute files through the Browse button on the tab for WinCon Utility, as shown in the
below figure. Note that they are executed in order of program 1, program 2, ...
nd
Ethernet MAC address)
e box: This field displays the EEPROM size of the
Size box: This field displays the Flash memory size of the
e Size box: This field displays the size of the current operating
WinCon-8000 Getting Start Manual-- 19
st
Ethernet MAC address, Lower field