Table of Contents
Advertisement
1.
Copy the Demo.exe and Wincon.DLL from the C:\Project\Demo\ARMV4Rel\
subfolder to Wincon-8000.
2.
Double-click on the Demo.exe file to apply it into Wincon-8000, as shown in
the following figure.
3.
Type "3" into the "Input DO Value" field (above figure), and click the "Digital
Output" button. Then, you can turn on channels 0 and 1 on the Digital output
Module plugged into slot 1 of Wincon-8000.
Fig. 5-2-18
WinCon-8000 Getting Start Manual-- 62
Advertisement
Table of Contents
