ICPDAS WinCon-8000 Getting Started page 15

Note: If you have changed any information of the Device Name, you must
save the registry by means of WinCon Utility tools. For more information
about the WinCon Utility tool, please refer to the WinCon Utility section.
Here, we only provide some demonstrations for configuring your settings. The
configuration steps and operation methods are the same as with the windows system.
However, you need to keep in mind "if you have changed any setting on
WinCon-8000 embedded controller, you would need to use the WinCon utility to
save the current setting into non-volatile internal memory". Otherwise, when you
restart the system, the setting will not change.
WinCon-8000 Getting Start Manual-- 15