Table of Contents
Advertisement
Path information is stored in directory settings and it allows you to configure them.
You can change both the paths listed in these settings and the order in which
eMbedded Visual C
The path specifications have separated the setting for the different devices and
the different platforms (such as WCE emulator) supported by your installation of
eMbedded Visual C
To specify default folders for demo project files
1.
Open the "Options" dialog in the "Tools" menu.
2.
In the "Directories" tab, select the "SA_IA"(for W-8X3X) or
"SADU_SACR" (for W-8X4X) on the "Platform" item, "Win32 [WCE
ARMV4]" in the "CPUs" item and also the "Show directories" in the
"include files" or "Library files" item.
3.
Since all the WinCon specific include and library files have been
allocated in default directories, users don't need to modify the contents of
default directories of include and library files .
4.
Fig 5-1-6 display the default location of include files.
Location of WinCon SDK Include files
++
searches for them.
++
.
WinCon-8000 Getting Start Manual-- 38
Fig. 5-1-6
Advertisement
Table of Contents
