ICPDAS WinCon-8000 Getting Started page 17

The Save Registry tab includes the following folders:
Save and Reboot button: It will take several seconds to save your settings
into registry and non-volatile internal memory. You must then reboot the
system for the new configuration.
Recover to Factory Setting button: It will take several seconds to clear
your registry settings back to Factory Setting and Wright to non-volatile
internal memory. You must then reboot the system for the new
configuration.
View Registry button: Any settings are changed in the WinCon embedded
controller can be pre-viewed by using this function. It is just like the ?regedit
function in the windows system that you are very familiar with (shown in
below figure).
Fig. 2-6
Fig. 2-7
WinCon-8000 Getting Start Manual-- 17