Hardware Setup ( For W-8X4X Only, Dual Lan Version Wincon) - ICPDAS WinCon-8000 Getting Started

1.3

Hardware Setup ( for W-8X4X only, Dual LAN version WinCon)

Another succeeding WinCon family is W-8X4X . Inheriting almost all
hardware features from W-8X3X, W-8X4X has the same user interface and OS
features. The only difference between W-8X4X and W-8X3X is that W-8X4X
adopts 2 USB ports and two 10/100M Ethernet ports instead of 2 PS2 jacks.(Fig.
1-5). In the left side connect the standard computer interface like 15 pin VGA port
monitor (can support the touch screen as HMI device), Keyboard(USB),
Mouse(USB), and Ethernet (10/100Base x2). In the middle and right-side area,
you can plug in the ICPDAS's I-8K andi-87K series I/O modules. The W-874X
can plug in 7(max.) local I/O modules and W-834X for 3(max.) local I/O modules.
There is no I/O slot for W-804X, so it can't plug in any local I/O modules. On the
under lift side, The COM2 is a standard 5 wire RS232 com port. You can connect
the standard RS232 device (modem ...). The COM3 is standard RS485 port. You
can connect to the RS485 devices like ICPDAS's products I-7K series I/O
modules andi-87KX expansion unit.
Fig. 1-5
WinCon-8000 Getting Start Manual-- 7