I-87K Module Settings - ICPDAS WinCon-8000 Getting Started

About WinCon Utility 1 Tab
This tab provides an easy function to hyperlink to the ICPDAS World Wide Web
site http://www.icpdas.com. This is the best place to go for the latest developments,
and support information, application stories, and product news.

2.3 i-87K Module Settings

Configuration of i-87K modules on WinCon-8000 can be done easily on PC by
the following instructions:
1. On WinCon, please check out if you get the latest DCON_CE software
under the folder: \Compact Flash\ICPDAS\Tools (My Computer
Compact Flash ICPDAS Tools)
2. If you do not have the latest version of DCON_CE, please download it from
website http://www.icpdas.com/products/wincon/winconutility.htm. Save
your execution file into the folder \Compact Flash\ICPDAS\Tools (go to:
My Computer
3. Connect PC and WinCon over Ethernet. ( connect Ethernet port directly or
by using a hub, please note: the IP address of PC and WinCon must be on
the same subnet, for example, if your WinCon IP address is
192.128.100.17, then your PC IP address must be set up as something like
192.128.100.xx)
4. Connect your PC(RS232 connector) and WinCon(COM2) by Null Modem
(Null Modem is included in your hardware package)
5. Please install the latest version of DCON_Utility software on your PC. You
can download it from
Compact Flash ICPDAS Tools)
WinCon-8000 Getting Start Manual-- 24