Table of Contents
Advertisement
Do not install the product in the locations below:
•
Poorly ventilated spaces.
•
Near a radiator, other heat sources, or in direct sunshine.
•
Continual vibration areas.
•
Humid, dusty, steamy, or oily areas.
•
An environment where there are corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen
dioxide, chlorine, ammonia, ozone, etc.).
REQUIRED
•
Outdoors.
•
High-temperature environment where humidity changes rapidly and condensation is likely to
occur.
•
A ceiling or wall that is not strong enough to support the product and mounting accessories.
Do not mount the product upside down.
Prevent tipping and falling for earthquakes or other shocks.
To prevent personal injury or damage to the product caused by tipping over due to earthquakes or
other shocks, make sure to install the product in a stable location and take measures to prevent
falling.
The measures to prevent falling and tipping are intended for reducing the risk of injury, but may not
guarantee the effectiveness against all earthquakes.
The product may tip causing personal injury.
•
When using the product with the optional table top
stand, fasten the product to a wall using a cord or
chain that can support the weight of the product in
order to prevent the product from falling.
•
Depending on the table top stand, the stand has
the structure for preventing tipping.
•
Please refer to the table top stand manual.
REQUIRED
•
Be sure to remove the cord or chain from the wall
before moving the product to prevent personal
injury or damage to the product.
The product may fall causing personal injury.
•
Do not attempt to hang the product using an
installation safety wire.
•
Please install the product in an area on the wall or ceiling strong enough to support the weight of
the product.
•
Prepare the product using mounting accessories, such as hook, eyebolt, or mounting parts, and
then secure the product with a safety wire. The safety wire must not be tight.
•
Please make sure the mounting accessories are strong enough to support the product weight
and size before installing it.
WARNING
ME652
English−7
Cord or chain
Screw Holes
Clamp
Screw (M4)
Advertisement
Table of Contents
