Setting Security And Locking The Monitor Controls - Sharp MultiSync ME652 User Manual

Setting Security and Locking the Monitor Controls

Under normal operation, the monitor can be controlled by any person using the remote control or the monitor control panel. You
can prevent unauthorized use and changes to the monitor settings by enabling the options for Security and Lock Settings.
The security and locking functions covered in this section are:
• Setting the password
• Enabling password security
• Locking the remote control buttons (See
• Locking the monitor control panel buttons (See
Settings Location
The instructions in this section guide you through configuring security and locking functions in the monitor's OSD menu. These
settings can also be configured using the monitor's web controls. See
The menu options for Security and Lock Settings are in the [Protect] menu in both the OSD menu and web controls.
nPassword Security
When password security is enabled, an alphanumeric password between 4 and 64 single-byte is required when turning on the
main power and/or accessing the [Administrator Settings] menu (see
password is entered. If no buttons are pressed during the period you set for [OSD Time], the monitor will be locked automatically
and the password will be required again.

TIP: If you change the password make a note of the password in a secure location. If you forget your password, you will need
to contact technical support to get a recovery password to access the monitor's OSD menu.
page 13)
page 14)
English−36
page 45.
page 37). The monitor will function normally after the