Important Information - Sharp Multisync Me652 User Manual

Large format display

Hide thumbs Also See for MultiSync ME652:

User manual (77 pages)

Table of Contents

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB port, USB

Type C port and Audio output terminal. Use shielded cables with ferrite core to connect to the following terminals: HDMI input

terminal, RS-232C input terminal.

Supplier's Declaration of Conformity

SHARP

LCD MONITOR, PN-ME652/PN-ME552/PN-ME502/PN-ME432

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION

100 Paragon Drive, Montvale, NJ 07645

TEL: (630) 467-3000

An apparatus with CLASS I construction shall be connected to a MAIN socket outlet with a protective earthing connection.

(For Customers in U.K.)

• The wires in this mains lead are coloured in accordance with the following code:

• As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug

proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety

earth symbol

or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

• Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.