Table of Contents
Advertisement
Picture
Advanced
HDR Mode*
*
3,
4
HDMI input only
Sharpness*
*
1,
3
Adaptive Contrast*
*
1,
3
Aspect*
*
1,
3
Normal
Full
Wide
1:1
Zoom
Zoom
Ambient Light Sensing
Reset
*
: This function is not available when [HOME] is set to the input.
1
*
: This function is not available when [Picture Mode] is set to something other than [Custom].
2
*
: This function is not available when [Color Temperature] is set to [Thru].
3
*
: This function is not available when the current input is [USB-C].
4
Allows selection of a preferred gamma correction when the monitor detects an HDR signal.
TIP:
This function may not work depending on the application or MediaPlayer contents.
Adjusts the crispness of the image. Press + or – button to adjust.
Sets the level of adjustment for dynamic contrast.
If [High] is set, the image is shown clearly but it makes brightness unstable due to the wide gap in contrast
variation.
Sets the aspect ratio for the screen image or manually adjust the zoom level and position.
TIP:
[Zoom] is not available for an image with an input resolution of 4K.
Shows the aspect ratio as it is sent from the source.
Fills the entire screen.
Expands a 16:9 letterbox signal to fill the entire screen.
Shows the image in a 1 by 1 Pixel format. (If the input resolution is higher than the recommended
resolution, the image will be scaled down to fit the screen).
Expands/reduces the image.
TIP:
The areas of the expanded image that are outside of the active screen area are not shown. The
reduced image may have some image degradation.
Maintains the aspect ratio while zooming.
The backlight of the LCD panel can be set to increase or decrease depending on the amount of ambient
light within the room. If the room is bright, the monitor becomes correspondingly bright.
If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the
viewing experience more comfortable to the eye in a variety of lighting conditions.
The ambient parameter setting:
[Ambient Light Sensing] in OSD, select [On] and set [Illuminance] and [Backlight].
In Bright: Setting to use in a bright room.
Illuminance - The illuminance level in a bright room.
Backlight - The maximum level of backlight in a bright room.
In Dark: Setting to use in a dim room.
Illuminance - The illuminance level in a dim room.
Backlight - The minimum level of backlight in a dim room.
Human Sensing: Shows the current setting level of [Illuminance] and [Backlight].
When the [Ambient Light Sensing] is enabled the Backlight level of the screen changes automatically
according to the lighting conditions of the room (see figure below).
Backlight level set for
the monitor to use when
amibient lighting is low.
0%
Dark
L - Illuminance level set for the monitor to use when ambient lighting is low.
H - Illuminance level set for the monitor to use when ambient lighting is high.
TIP:
•
When setting to [On], [Backlight] cannot be changed.
•
Do not cover the optional sensor unit when [Ambient Light Sensing] is enabled. [Ambient Light
Sensing] is enabled when it is set to [On].
Resets all picture menu settings back to factory settings except for [Picture mode].
L
Room bright condition
English−54
100%
Backlight level set for
the monitor to use when
amibient lighting is high.
Backlight variable range.
Backlight setting range.
0%
H
100%
Bright
Advertisement
Table of Contents
