Advanced Operation; Creating A Power And Reboot Schedule - Sharp MultiSync ME652 User Manual

Creating a Power and Reboot Schedule

The schedule function allows the monitor to automatically change between power on and standby state at different times and
reboot.
To program the schedule:
1. Enter the [Schedule] menu.
①
Press the MENU button on the remote control.
②
Use the ▼ and ► buttons to select [Schedule] in [Administrator Settings]
menu. Press the SET button. Input the admin password if required.
2. Set the Power On Schedule.
①
Use the ►/▲/▼ buttons to select [Add Power On schedule] in [Power On
Schedule]. Press the SET button.
②
Use the ▲/▼ buttons to set the time. To move the setting field, press
◄/► buttons.
③
Select the [Input] that will become active at the schedule time.
④
Select the day(s) that will activate the schedule.
⑤
Press ▼ and ► button to select [Save]. Press the SET button.
3. Set the Power Off Schedule.
①
Use the ►/▲/▼ buttons to select [Add Power Off schedule] in [Power Off Schedule]. Press the SET button.
②
Use the ▲/▼ buttons to set the time. To move the setting field, press ◄/► buttons.
③
Select the day(s) that will activate the schedule.
④
Press ▼ and ► button to select [Save]. Press the SET button.
4. Set the Reboot Schedule.
①
Use the ►/▲/▼ buttons to select [Add Reboot schedule] in [Reboot Schedule]. Press the SET button.
②
Use the ▲/▼ buttons to set the time. To move the setting field, press ◄/► buttons.
③
Select the day(s) that will activate the schedule.
④
Press ▼ and ► button to select [Save]. Press the SET button.
5. Manage the schedules.
①
Use the ►/▲/▼ buttons to select [Schedule List] in [Schedule]. Press the SET button.
②
Use the ▲/▼ buttons to select the schedule that you want to change. To enable or disable, press ◄/► buttons. If you
want to change the time, day(s), or delete the schedule, press the SET button to open the detailed setting window.
③
To close the menu, press the EXIT button.
TIP:
• The [Date & Time] needs to be set before adding schedules.

• Schedules you configure are saved when pressing [Save] on the each setting menu.

• The [Input] in [Power On Schedule] has a higher priority than [Custom Detect] setting.

• Each schedule must be set at an interval of 5 minutes or more.

• Up to 15 "Schedule" items can be created.

• When a period of about two weeks has passed after disconnecting the power cord of the monitor, the time will be
initialized and the clock function will stop. If the clock function has stopped, configure the [Date & Time] again.

Advanced Operation

English−35