6.6
Logic Supply, Inputs and Outputs
6.6.1
Logic Supply, Inputs and Outputs
The 12-pin round connector is used to supply the integ-
rated motion controller and as an interface for the inputs
and outputs.
Round connector M16 in accordance with DIN EN
61076-2-106 (12-a)
Matching pre-fabricated connection cables are available
for the motors BG 95 dPro with a 12-pin round connec-
tor. For detailed information, see chapter
nector with Connection Cable" on page
Page/Seite 52 / 69
6.6
6.6.1
Der 12-polige Rundstecker dient der Versorgung des
integrierten Motioncontrollers und als Schnittstelle für die
Ein- und Ausgänge.
Rundstecker M16 nach DIN EN 61076-2-106 (12-a)
Für die Motoren BG 95 dPro mit 12-poligem Rundstecker
stehen passende, vorkonfektionierte Anschlussleitungen
„Mating Con-
zur Verfügung. Detailliertere Informationen entnehmen
55.
Sie dem Kapitel
Seite
BG 95
dPro
Logikversorgung, Ein- und Ausgänge
Logikversorgung, Ein- und Ausgänge
„Gegenstecker mit Anschlussleitung" auf
55.
Version 13-12-2023