Toyota Grand Highlander 2024 Manual page 239

WARNING
Do not damage the lens of the
●
front camera or allow it to
become dirty.
When cleaning the inside of the
windshield, do not allow glass
cleaner to contact the lens of
the front camera. Do not touch
the lens of the front camera.
If the lens of the front camera is
dirty or damaged, contact your
Toyota dealer.
Do not subject the front camera
●
to a strong impact.
Do not change the position or
●
orientation of the front camera
or remove it.
Do not disassemble the front
●
camera.
Do not modify any parts around
●
the front camera, such as the
inside rear view mirror or ceil-
ing.
Do not attach accessories
●
which may obstruct the front
camera to the hood, front grille,
or front bumper. For details,
contact your Toyota dealer.
If a surfboard or other long
●
object is to be mounted on the
roof, make sure that it will not
obstruct the front camera.
Do not modify or change the
●
headlights and other lights.
Front camera installation area
■
on the windshield
If the system determines that the
windshield may be fogged up, it
will automatically operate the
heater to defog the part of the
windshield around the front cam-
era. When cleaning, etc., be care-
ful not to touch the area around
the front camera until the wind-
shield has cooled sufficiently, as
touching it may cause burns.
4-5. Using the driving support systems
Precautions for the driver
■
monitor camera (if equipped)
Observe the following precau-
tions.
Failure to do so may lead to mal-
function of the driver monitor cam-
era and the systems not operating
properly, possibly leading to an
accident resulting in death or seri-
ous injury.
Do not subject the driver moni-
●
tor camera or its surrounding
area to strong impact.
If subjected to a strong impact,
the driver monitor camera may
move out of alignment and the
driver may no longer be detected
correctly. In this case, have the
vehicle inspected by your Toyota
dealer.
Do not disassemble or modify
●
the driver monitor camera.
Do not attach accessories,
●
stickers (including transparent
stickers), etc. to the driver moni-
tor camera or its surrounding
area.
Do not allow the driver monitor
●
camera or its surrounding area
to get wet.
Do not cover the driver monitor
●
camera or place anything in
front of it.
Keep the lens of the driver mon-
●
itor camera free from damage.
Do not touch the lens of the
●
driver monitor camera or allow it
to become dirty.
When there is dirt or fingerprints
on the camera lens, clean it with a
dry, soft cloth so as to not mark or
damage it.
When cleaning the lens, do not
●
use detergents or organic sol-
vents that may damage plastic.
239
4