Toyota Grand Highlander 2024 Manual page 380

Table of Contents

Advertisement

380
5-1. Using the air conditioning system and defogger
Rear air conditioning con-
trol screen
To change the airflow mode,
select the airflow mode control
switch.
The air outlets used are switched
each time the switch is selected.
: Air flows to the upper body
: Air flows to the upper body and
feet
: Air flows to the feet
Using automatic mode
1
Press the automatic mode
switch.
2
Adjust the temperature set-
ting.
3
To stop the operation, press
the "OFF" switch.
If the fan speed setting or air
flow modes are operated, the
automatic mode indicator goes
off. However, automatic mode
for functions other than that
operated is maintained.
Using automatic mode
Fan speed is adjusted automati-
cally according to the temperature
setting and the ambient conditions.
Therefore, the fan may stop for a
while until warm or cool air is ready
to flow immediately after the auto-
matic mode switch is pressed.
Air outlets
Location of air outlets
The air outlets and air volume
changes according to the
selected air flow mode.
Adjusting the position of
and opening and closing
the air outlets
1
Direct air flow to the left or
right, up or down
2
Open the vent
3
Close the vent
NOTICE
To prevent battery discharge
Do not leave the air conditioning
system on longer than necessary
when the engine is off.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grand highlander hybrid 2024

Table of Contents