Vehicle; Parking Support Brake Func- Tion (Moving Vehicles Rear Of The Vehicle) - Toyota Grand Highlander 2024 Manual

Parking Support Brake
function (moving vehi-
cles rear of the vehi-
*
cle)
*
: If equipped
If a rear radar sensor
detects a vehicle approach-
ing from the right or left at
the rear of the vehicle and
the system determines that
the possibility of a collision
is high, this function will
perform brake control to
reduce the likelihood of an
impact with the approaching

vehicle.

Examples of the function
operation
This function will operate in situ-
ations such as the following if a
vehicle is detected in the travel-
ing direction of the vehicle.
 When reversing, a vehicle is
approaching and the brake
pedal is not depressed, or is
depressed late
4-5. Using the driving support systems
Types of sensors
P.314
WARNING
To ensure the system can
■
operate properly
P.314
The Parking Support Brake
■
function (moving vehicles rear
of the vehicle) will operate
when
The function will operate when the
driving assist information indicator is
not illuminated (P.77, P.78) and all
of the following conditions are met:
Engine output restriction control
●
• The Parking Support Brake is
enabled.
• The vehicle speed is approxi-
mately 9 mph (15 km/h) or less.
• Vehicles are approaching from the
right or left at the rear of the vehi-
cle at a traveling speed of approx-
imately 5 mph (8 km/h) or more.
• The shift position is in R.
• The Parking Support Brake deter-
mines that a stronger than normal
brake operation is necessary to
avoid a collision with an approach-
ing vehicle.
Brake control
●
• Engine output restriction control is
operating.
• The Parking Support Brake deter-
mined that an emergency brake
operation was necessary to avoid
a collision with a vehicle
approaching from the rear.
The Parking Support Brake
■
function (moving vehicles rear
of the vehicle) will stop operat-
ing when
The function will stop operating if
any of the following conditions are
met:
Engine output restriction control
●
345
4