Toyota Grand Highlander 2024 Manual page 256

256
4-5. Using the driving support systems
• When the road, etc. is reflected on
the wall
• When the vehicle is approaching
the wall at an angle
Changing the pre-colli-
sion setting
 The pre-collision system can
be enabled/disabled through
a customize setting. (P.538)
The system is enabled each time
the engine switch is turned to ON.
 When the system is disabled,
the PCS warning light will illu-
minate and a message will be
displayed on the multi-infor-
mation display.
 The pre-collision setting can
be changed on the customize
settings. (P.538)
 Vehicles without active steer-
ing function: When the
pre-collision warning timing is
changed, the emergency
steering assist timing will also
be changed. When
selected, the emergency
steering assist (excluding the
active steering function) will
not operate in most cases.
 Vehicles with active steering
function: When the pre-colli-
sion warning timing is
changed, the emergency
steering assist (excluding the
active steering function) tim-
ing will also be changed.
When is selected, the
emergency steering assist
(excluding the active steering
function) will not operate in
most cases.
 Vehicles with a driver monitor
camera: When the system
determines that the driver is
not facing forward, the
pre-collision warning and
emergency steering assist will
operate at the
regardless of the user setting.
 When the dynamic radar
cruise control is operating, the
pre-collision warning will
operate at the
regardless of the user setting.
 Vehicles with Traffic Jam
Assist: When the Traffic Jam
Assist is operating, the
pre-collision warning will
operate at the
regardless of the user setting.
is
timing,
timing,
timing,