Toyota Grand Highlander 2024 Manual page 452

452
6-3. Do-it-yourself maintenance
vehicle is moving.
3
Select of the multi-infor-
mation display using the
meter control switches and
then press .
4
Select "Vehicle Settings" and
then press and hold
5
Select "TPWS setting" and
then press .
6
Select "Tire Set Switching"
and then press
7
Select "Register New Valve /
ID" and then press
8
Select "Tire Set 1" or "Tire
Set 2". Then press
ID codes will be registered to the
displayed wheel set.
To change the wheel set to be reg-
istered, select the displayed set,
and then select the wheel set you
wish to register.
If ID codes have already been reg-
istered for that wheel set, the tire
pressure warning light will slowly
blink 3 times, and a message indi-
cating that change is occurring will
be displayed on the multi-informa-
tion display.
9
Select "Yes" and then press
The tire pressure warning light will
slowly blink 3 times and a message
indicating that ID code registration
is being performed will be displayed
on the multi-information display.
Wheel set changing will be can-
celed and registration will begin.
.
When registration is being per-
formed, the tire pressure warning
light will blink for approximately 1
minute then illuminate and "---" will
be displayed for the inflation pres-
sure of each tire on the multi-infor-
mation display.
.
10Drive straight (with occa-
sional left and right turns) at
approximately 25 mph (40
.
km/h) or more for approxi-
mately 10 to 30 minutes.
.
When registration is complete, the
tire pressure warning light will turn
off and a message indicating that
registration has been completed
will be displayed on the multi-infor-
mation display.
Registration may take longer than
normal to complete if the vehicle
speed cannot be maintained at
approximately 25 mph (40 km/h) or
more. If registration cannot be com-
pleted after driving for 1 hour or
more, perform the registration pro-
cedure again from the beginning.
11If the tire inflation pressure of
the wheel set installed differs
from that of the previous set,
it will be necessary to per-
form the tire inflation pres-
sure setting procedure of the
tire pressure warning system.
(P.449)
If the specified tire inflation pres-
sure is the same, it will not be nec-
.