Toyota Grand Highlander 2024 Manual page 356

356
4-5. Using the driving support systems
or snow, the TRAC system may
reduce power from the engine to the
wheels. Pressing the
turn the system off may make it eas-
ier for you to rock the vehicle in
order to free it.
To turn the TRAC system off, quickly
press and release the
The "Traction Control Turned OFF"
will be shown on the multi-informa-
tion display.
Press the switch again to turn
the system back on.
■
Turning off both TRAC, VSC
and Trailer Sway Control sys-
tems
To turn the TRAC, VSC and Trailer
Sway Control systems off, press
and hold the switch for more
than 3 seconds while the vehicle is
stopped.
The VSC OFF indicator light will
come on and the "Traction Control
Turned OFF" will be shown on the
multi-information display.
Press the switch again to turn
the system back on.
*
: On vehicles with PCS (Pre-Colli-
sion System), PCS will also be
disabled (only Pre-Collision warn-
ing is available). The PCS warning
light will come on and a message
will be displayed on the
multi-information display.
(P.246)
■
When the message is dis-
switch to
played on the multi-information
display showing that TRAC has
been disabled even if the
switch has not been pressed
TRAC is temporary deactivated. If
switch.
the information continues to show,
contact your Toyota dealer.
■
Operating conditions of
hill-start assist control
When the following four conditions
are met, the hill-start assist control
will operate:
●
The shift position is in a position
other than P or N (when starting
off forward/backward on an
upward incline)
●
The vehicle is stopped
●
The accelerator pedal is not
depressed
●
The parking brake is not engaged
●
Engine switch is turned to ON
■
Automatic system cancelation
of hill-start assist control
The hill-start assist control will turn
off in any of the following situations:
●
The shift position is shifted to P or
N
●
The accelerator pedal is
depressed
●
The brake pedal is depressed and
the parking brake is engaged
●
A maximum of 2 seconds have
*
elapsed after the brake pedal is
released
●
Engine switch is turned to OFF
■
Sounds and vibrations caused
by the ABS, brake assist, VSC,
Trailer Sway Control, TRAC and
hill-start assist control systems
●
A sound may be heard from the
engine compartment when the
brake pedal is depressed repeat-
edly, when the engine is started or