Laws and regulations pertain-
■
ing to anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming
to FMVSS213 or CMVSS213 speci-
fications can be used.
This vehicle is designed to conform
to SAE J1819.
WARNING
When installing a child
■
restraint system
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
Firmly attach the top tether
●
strap and make sure that the
belt is not twisted.
Do not attach the top strap to
●
anything other than the anchor
bracket.
Follow all installation instruc-
●
tions provided by the child
restraint system manufacturer.
When installing the child
●
restraint system with the head
restraint being raised, after the
head restraint has been raised
and then the anchor bracket has
been fixed, do not lower the
head restraint.
When installing a child restraint
●
system in the rear center seat,
adjust both seat cushions to the
same position and align both
seatbacks at the same angle.
The seatbacks must be
adjusted to the same angle.
Otherwise, the child restraint
system cannot be securely
restrained and this may cause
death or serious injuries in the
event of sudden braking, sud-
den swerving or an accident.
1-2. Child safety
If the seat is adjusted, reconfirm
●
the security of the child restraint
system.
67
1