Toyota Grand Highlander 2024 Manual page 206

206
4-2. Driving procedures
*1
1
Off
The emergency flashers can be
used.
*2
2
ACC
Some electrical components such
as the audio system can be used.
3
ON
All electrical components can be
used.
*1
: If the shift lever is in a position
other than P or the shift release
button is pressed when turning
off the engine, the engine switch
will be turned to ACC, not to
OFF.
*2
: ACC mode can be enabled/dis-
abled on the customize menu.
(P.538)
Auto power off function
■
If the vehicle is left in ACC or ON
(the engine is not running) for more
than 20 minutes with the shift lever
is in P or the shift release button is
not pressed, the engine switch will
automatically turn to OFF. However,
this function cannot entirely prevent
battery discharge. Do not leave the
vehicle with the engine switch in
ACC or ON for long periods of time
when the engine is not running.
When ACC customization is in
■
off
With the engine switch is turned
●
off, the Multimedia Display can
still be used for a certain time until
the battery saving function starts
operating.
When the safe exit assist is oper-
●
ating, a buzzer will sound and a
voice guidance will be given.
(P.319)
NOTICE
To prevent battery discharge
■
Do not leave the engine switch
●
in ACC or ON for long periods of
time without the engine running.
If "ACCESSORY" or "POWER
●
ON" is displayed on the meters
while the engine is not running,
the engine switch is not off.
Exit the vehicle after turning the
engine switch off.
When stopping the engine
with the shift position in a
position other than P
If the engine is stopped when
the shift lever is in a position
other than P or the shift release
button is pressed, the engine
switch will not be turned off but
instead be turned to ACC. Per-
form the following procedure to
turn the switch off:
1
Check that the parking brake
is set.