Attachment Of Bobbin Winder Unit Cover Assy - Baby Lock BLDY Service Manual

Basic of Assembly
7

Attachment of Bobbin winder unit cover assy

1. Connect the lead wire assy RGBLED to the RGB LED PCB assy of the bobbin winder unit cover assy.
Set the bobbin winder unit cover assy to the machine, and secure it with the five screws (screw, bind
M4x6).
*Key point
• Refer to "Wiring of Bobbin winder unit cover
2. Attach the two screw caps to the bobbin winder unit cover assy.
3. Connect the lead wire assy BW to the main PCB assy.

Refer to 3 - 125 Assembly of Bobbin winder unit cover assy.
Screw, bind M4x6
Screw cap
Screw cap
Screw, bind M4x6
Main frame and covers
assy".
2 - 68
Screw, bind M4x6
Bobbin winder unit cover assy
Lead wire assy BW
Lead wire assy RGBLED
Connector of lead wire assy BW (CN9)
Screw, Bind M4X6
Connector of lead wire
assy RGBLED
Main PCB assy