Baby Lock BLDY Service Manual page 143

Application of
Disassembly
5
Removal of Adjusting screw and Plate spring
1. Remove the adjusting screw from the arm bed.
2. Remove the two screws (screw, bind M4x5) to remove the plate spring from the arm bed.
Screw, Bind M4X5
Adjusting screw
6
Removal of Tension pulley holder B assy
1. Remove the three screws (taptite, bind S M4x10) to remove the tension pulley holder B assy from the
arm bed.
Taptite, Bind S M4X10
Tension pulley holder B assy
Taptite, bind S M4x10
LED light / Upper driving mechanism
Plate spring
3 - 45
Screw, bind M4x5