Baby Lock BLDY Service Manual page 147

Application of
Disassembly
3. Remove the spring (XZ0385) from the feed bar assy and vertical feed shaft of drop assy.
4. Remove the two screws (set screw, socket (CP) M4x4), and then remove the two feed bar shafts A to
remove the feed bar assy.
5. Remove the cap, lock nut and screw (set screw, socket (FT) M4x10).
Lock nut
Set screw, socket (FT) M4x10
Feed bar assy
Spring (XZ0385)
Vertical feed shaft
Set Screw, Socket (CP) M4X4
Set Screw, Socket (FT) M4X10
Feed module
Feed bar assy
Cap
Feed bar shaft A
3 - 49
SPRING (XZ0385)
Spring (XZ0385)
Feed bar shaft A
Set screw, socket (CP) M4x4