Baby Lock BLDY Service Manual page 181

Application of
Disassembly
2
Removal of E hoop stay plate assy
1. Remove the screw (screw, bind M3x4) and screw (screw, pan (S/P washer) M3x7) to remove the E
hoop stay cover.
2. Remove the two screws (screw, bind M4x6) to remove the E hoop stay plate assy, and disconnect the
flexible flat cable:SML2CD-6 from the frame sensor PCB assy.
Screw, bind M3x4
E hoop stay cover
Screw, bind M4x6
Embroidery unit
Screw, pan (S/P washer) M3x7
E hoop stay plate assy
Frame sensor PCB assy
3 - 83
Flexible flat cable:SML2CD-6
Screw, Bind M3X4
Screw, Pan (S/P washer) M3X7
Screw, Bind M4X6