Application of
Disassembly
8
Disassembly of Connector holder assy
1. Unlock the two locks to open the ferrite core, and remove the ferrite core from the lead wire assy main body.
2. Remove the two retaining rings E3 and two washer plains S M3.5 to remove the lead wire assy main body
from the connector holder assy.
Washer plain S M3.5
Retaining rings E3
9
Removal of Sensor connector holder D
1. Remove the two screws (screw, bind M4x6) to remove the sensor connector holder D from the base plate.
Main frame and covers
Lead wire assy main body
Washer plain S M3.5
3 - 17
Ferrite core
Screw, bind M4x6
Sensor connector holder D
Base plate
Locks
Connector holder assy
Screw, Bind M4X6