Baby Lock BLDY Service Manual page 209

Application of
Assembly
4
Attachment of Reversal link plate assy, Pull link and Reversal link assy
1. Align the boss of the reversal link plate assy with the positioning hole of feed module, and attach the
reversal link plate assy to the feed module with the screw (screw, bind M4x8).
2. Align the notch of pull link with the tab of drop lever Q, set the pull link to the drop lever Q, and turn the
pull link to the direction of the arrow.
3. Set the reversal link assy to the shaft of reversal link plate assy, and attach the retaining ring E3 to the
shaft. Set the pull link to the shaft of reversal link assy, and attach the retaining ring E2.5 to the shaft.
Tab
Drop lever Q
Screw, Bind M4X8
Lower driving mechanism
Pull link
Notch
Feed module
3 - 111
Retaining ring E3
Reversal link assy
Retaining ring E2.5
Screw, bind M4x8
Reversal link plate assy