Basic of Assembly
LED lamp / Upper driving mechanism
8
Attachment of Tension pulley assy
1. Align the positioning hole of tension pulley assy with the boss of tension pulley holder B assy, set the
tension pulley assy to the tension pulley holder B assy, and tighten the screw (upset M4x12DB)
temporarily.
*Key point
• Fully tighten the screw after performing
"Adjustment of Timing belt
tension".
Upset M4X12DB
Tension pulley holder B assy
Tension pulley assy
Upset M4x12DB
2 - 46