Basic of Assembly
7
Attachment of Upper shaft cover
1. Attach the upper shaft cover to the arm bed with the three screws (screw, pan (S/P washer) M4x10DB).
Refer to 3 - 107 Assembly of Upper shaft cover.
2. Set the cord guide to the upper shaft cover and the connecting PCB holder, then secure it with the
screw (taptite, bind B M3x8).
Screw, Pan (S/P washer) M4X10DB
Taptite, Bind B M3X8
Screw, pan
(S/P washer) M4x10DB
LED lamp / Upper driving mechanism
Upper shaft cover
2 - 45
Cord guide
Taptite, bind B M3x8
Connecting
PCB holder