Baby Lock BLDY Service Manual page 239

Application of
Assembly
2. Attach the panel PCB assy to the panel board holder with the four screws (screw, bind M3x6).
3. Connect the lead wire assy MFFC to the CN8 on the panel PCB assy. Connect the FFC of touch panel
to the CN10 on the panel PCB assy, and lock it. Connect the flexible flat cable:20706ASFBI to the CN7
on the panel PCB assy, and lock it.
*Key point
• Refer to "Wiring of Panel PCB
4. Align the positioning hole of plate E with the boss of front cover assy, and attach the plate E and the
panel board ground plate U to the front cover assy with the screw (taptite, cup B M4x8). Attach the
panel board ground plate U and the clip to the panel board holder with the screw (screw, bind M3x6).
5. Align the positioning hole of plate E with the boss of front cover assy, and attach the plate E to the front
cover assy with the screw (taptite, cup B M4x8).
Screw, Bind M3X6
Taptite, Cup B M4X8
Lead wire assy MFFC
Panel board holder
Flexible flat cable:20706ASFBI
FFC
Screw, bind M3x6
Screw, bind M3x6
Main frame and covers
assy".
Panel PCB assy
3 - 141
Front cover assy
Plate E
Taptite, cup B M4x8
Plate E
Taptite, cup B M4x8
Panel board ground plate U
Clip
Screw, bind
M3x6