Baby Lock BLDY Service Manual page 122

Application of
Bobbin winding mechanism
Disassembly
4. Remove the spool presser C and spool felt from the spool pin. Remove the screw (taptite, cup B
M3x10) and pull out the spool pin holder assy from the spool pin to remove the spool pin.
5. Remove the screw (taptite, cup B M3x10) to remove the thread guard plate.
6. Release the hook to remove the thread guard pin cap, and then pull out the thread guard pin.
Taptite, Cup B M3X10
Spool pin
Spool presser C
Spool felt
Bobbin winder unit cover
Thread guard pin cap
Hook
Thread guard pin
Thread guard plate
Spool pin holder assy
Taptite, cup B M3x10
3 - 24