Baby Lock BLDY Service Manual page 108

Application of
Disassembly
6-5 Removal of Panel PCB assy and Panel board holder
1. Remove the screw (taptite, cup B M4x8) to remove the plate E.
2. Remove the screw (taptite, cup B M4x8) and screw (screw, bind M3x6) to remove the clip, panel board
ground plate U and plate E.
3. Unlock the lock to disconnect the flexible flat cable:20706ASFBI from the panel PCB assy. Unlock the
lock to disconnect the FFC of touch panel from the panel PCB assy. Disconnect the lead wire assy
MFFC from the panel PCB assy.
4. Remove the four screws (screw, bind M3x6) to remove the panel PCB assy from the panel board
holder.
Taptite, Cup B M4X8
Screw, Bind M3X6
Lead wire assy MFFC
Panel board holder
Flexible flat cable:20706ASFBI
FFC
Screw, bind M3x6
Screw, bind M3x6
Main frame and covers
Panel PCB assy
3 - 10
Front cover assy
Plate E
Taptite, cup B M4x8
Plate E
Taptite, cup B M4x8
Panel board ground plate U
Clip
Screw, bind
M3x6