Baby Lock BLDY Service Manual page 303

Application of
Assembly
14
Attachment of ES base cover unit
1. Slide the X carriage assy to come in sight of the two screw holes.
2. Attach the ES base cover unit to the main frame assy with the two screws (taptite, cup B M4x14).
Tighten the four screws (screw, pan (S/P washer) M4x8) to the back of ES base cover unit.
Taptite, cup B M4x14
Main frame assy
Embroidery unit
Screw, pan
(S/P washer) M4x8
Screw, pan
(S/P washer) M4x8
3 - 205
X carriage assy
Screw, pan
(S/P washer) M4x8
Taptite, Cup B M4X14
Screw, Pan (S/P washer) M4X8
ES base cover unit
Screw, pan
(S/P washer) M4x8